Our handmade items are made with love, so please allow a turnaround time of 5-7 business days (possibly longer during holidays). If a rush order is required, please e-mail us at shopsouthernsugar@gmail.com or message us on facebook: Southern Sugar Boutique & Handmade.

Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
  • Load image into Gallery viewer, Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
  • Load image into Gallery viewer, Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
  • Load image into Gallery viewer, Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte
  • Load image into Gallery viewer, Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte

Blank Sublimation Photo Slate Plaque w/ Feet - 5.9” x 7.8" - Rectangle Matte

Vendor
SubliSlate
Regular price
$8.99
Sale price
$8.99
Regular price
$12.99
Sold out
Unit price
per 
Shipping calculated at checkout.

Blank Sublimation Photo Slate Plaque - 5.9 x 7.8" - Rectangle Matte Rock Slate Plaque with black display feet

Smooth, machined sublimatable slate, each with unique fractured edges

Slate can vary in size by up to -0.4".

Production for slate requires the use of a green rubber pad, 1/8" thick and at least an inch larger than the plaque.

These plaques make amazing photo presentations. Our slate is a natural, hand cut material and imperfections in shape, size, and coating are to be expected.

 

Instructions:

time: 7 minutes

temp: 400 degrees

pressure: medium

Hover under open heat press for 10 seconds to dry excess moisture.

1. Cover the bottom table of the press with a sheet of protective paper.
2. Wrap your transfer around your slate and tape it to the back of the slate using heat tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper, on bottom table.
4. Cover it with a piece of protective paper and 1/8" Heat Conductive Green Rubber Pad and press according to time, temperature, and pressure above.

Application notes: If you do not use a green pad, your transfer paper may stick to the Slate and it is difficult to remove. Once your green pad heats up, you might want to reduce press time by about 30 seconds. Cleaning the slate before pressing is recommended.